A compact, pre-assembled electrical system designed for campervans, motorhomes and van conversions.
This system is supplied exactly to the specification listed below and is built to order with an approximate 2-week lead time.
It provides a straightforward way to add or upgrade DC-DC charging, solar charging, 12V distribution and 230V power in one compact installation.
Renogy 2000W inverter
Renogy 30A DC-DC charger with built-in MPPT solar controller
12-way fused 12V distribution board
Solar isolator suitable for up to 400W of solar
Battery connection tails ready to connect to your leisure battery
Heavy-duty cabling
Isolation and circuit protection components
Mounted on compact phenolic plywood
The system arrives pre-assembled and ready to be incorporated into your campervan or motorhome electrical installation.
The main connections required are:
Vehicle starter battery for DC-DC charging
Solar panels
Leisure battery
Individual 12V circuits connected to the fused distribution board
The 12-way distribution board can be used to power suitable 12V equipment including:
Lighting
Diesel heaters
Water pumps
USB charging points
Fans
Fridges
Other 12V accessories
Because the main electrical components are already assembled, wired and protected on one compact board, the system is designed to make DIY campervan electrical installations much simpler and more straightforward.
Once your system is installed, you simply connect your individual 12V circuits to the distribution board.
The included Renogy 2000W inverter provides 230V AC power for suitable appliances within the inverter's rated output.
Depending on the individual appliance's power requirements, this can include equipment such as:
Microwaves
Air fryers
Laptops and chargers
TVs
Other 230V appliances
Always check the continuous and start-up power requirements of any appliance before use.
The Renogy 30A DC-DC charger allows your leisure battery to be charged from the vehicle starter battery while driving.
It also features a built-in MPPT solar controller, allowing solar panels to be connected directly into the system.
The included solar isolation is suitable for installations with up to 400W of solar.
This system is a practical option for both new conversions and older campervans requiring an electrical upgrade.
It is particularly suitable for replacing older split-charge relay systems with a modern DC-DC charging setup, while also adding solar charging, fused 12V distribution and inverter power.
Its compact layout makes it particularly useful where installation space is limited.
The system can be built in either portrait or landscape orientation to better suit your available installation space.
Portrait: 50cm H × 40cm W × 27cm D
Landscape: 40cm H × 50cm W × 27cm D
Each system is assembled to order.
Approximate lead time: 2 weeks from order.
If you are unsure whether this system is suitable for your campervan or motorhome, please call Adrian on 07933 562457.
We are happy to discuss your battery setup, solar requirements, expected power usage and available installation space before you order.
When you purchase one of our electrical systems, we're also available to provide telephone advice during your installation.
If you are carrying out your own campervan conversion and need help understanding where to connect your lighting, water pump, diesel heater, USB outlets or other 12V circuits, you can give us a call and we'll help guide you through connecting everything to your system.
The idea behind these pre-assembled systems is to take much of the complicated electrical work out of a campervan conversion, making a DIY installation considerably easier while still giving you access to advice if you need it.
The following upgrades are available:
Renogy 50A DC-DC charger +£50
Electric hook-up +£275
Electric hook-up components are supplied separately and are not mounted to the board.
If you would like to add any of these upgrades, please select them when ordering or contact us before placing your order.
A compact, pre-assembled electrical system designed for campervans, motorhomes and van conversions.
This system is supplied exactly to the specification listed below and is built to order with an approximate 2-week lead time.
It provides a straightforward way to add or upgrade DC-DC charging, solar charging, 12V distribution and 230V power in one compact installation.
Renogy 2000W inverter
Renogy 30A DC-DC charger with built-in MPPT solar controller
12-way fused 12V distribution board
Solar isolator suitable for up to 400W of solar
Battery connection tails ready to connect to your leisure battery
Heavy-duty cabling
Isolation and circuit protection components
Mounted on compact phenolic plywood
The system arrives pre-assembled and ready to be incorporated into your campervan or motorhome electrical installation.
The main connections required are:
Vehicle starter battery for DC-DC charging
Solar panels
Leisure battery
Individual 12V circuits connected to the fused distribution board
The 12-way distribution board can be used to power suitable 12V equipment including:
Lighting
Diesel heaters
Water pumps
USB charging points
Fans
Fridges
Other 12V accessories
Because the main electrical components are already assembled, wired and protected on one compact board, the system is designed to make DIY campervan electrical installations much simpler and more straightforward.
Once your system is installed, you simply connect your individual 12V circuits to the distribution board.
The included Renogy 2000W inverter provides 230V AC power for suitable appliances within the inverter's rated output.
Depending on the individual appliance's power requirements, this can include equipment such as:
Microwaves
Air fryers
Laptops and chargers
TVs
Other 230V appliances
Always check the continuous and start-up power requirements of any appliance before use.
The Renogy 30A DC-DC charger allows your leisure battery to be charged from the vehicle starter battery while driving.
It also features a built-in MPPT solar controller, allowing solar panels to be connected directly into the system.
The included solar isolation is suitable for installations with up to 400W of solar.
This system is a practical option for both new conversions and older campervans requiring an electrical upgrade.
It is particularly suitable for replacing older split-charge relay systems with a modern DC-DC charging setup, while also adding solar charging, fused 12V distribution and inverter power.
Its compact layout makes it particularly useful where installation space is limited.
The system can be built in either portrait or landscape orientation to better suit your available installation space.
Portrait: 50cm H × 40cm W × 27cm D
Landscape: 40cm H × 50cm W × 27cm D
Each system is assembled to order.
Approximate lead time: 2 weeks from order.
If you are unsure whether this system is suitable for your campervan or motorhome, please call Adrian on 07933 562457.
We are happy to discuss your battery setup, solar requirements, expected power usage and available installation space before you order.
When you purchase one of our electrical systems, we're also available to provide telephone advice during your installation.
If you are carrying out your own campervan conversion and need help understanding where to connect your lighting, water pump, diesel heater, USB outlets or other 12V circuits, you can give us a call and we'll help guide you through connecting everything to your system.
The idea behind these pre-assembled systems is to take much of the complicated electrical work out of a campervan conversion, making a DIY installation considerably easier while still giving you access to advice if you need it.
The following upgrades are available:
Renogy 50A DC-DC charger +£50
Electric hook-up +£275
Electric hook-up components are supplied separately and are not mounted to the board.
If you would like to add any of these upgrades, please select them when ordering or contact us before placing your order.
